Chief Fusion Manual de Instalação descarregar pdf (Página 6)

LCM Video Wall Series Installation Instructions

Installing Interface Brackets to Displays

1. Place displays face down on a soft, non-abrasive surface.

IMPORTANT ! : Screen width information is contained in

the Dimension drawings at the end of these instructions.

CAUTION: Using screws of improper diameter may

damage your display! Proper screws will easily thread into

display mounting holes.

2. Select screw diameter by examining hardware (A-C and F-H)

(6mm or 8mm) and comparing with mounting holes on

display. (See Figure 3)

3. Select spacers:

• Spacers are NOT

required if mounting holes are

not recessed and interface brackets (L and M)

can lay flat against display.

• Spacers (E) ARE

required if mounting holes are

recessed, or if protrusions prevent interface

brackets (L and M) from laying flat.

CAUTION: Using screws of improper length may damage

your display! Proper screws will have adequate thread

engagement without contacting bottom of display mounting

holes.

4. Select screw length: (See Figure 3)

• By hand, insert SHORTEST length screw of

selected diameter (A or F) through 1/4" washer

(D), bracket (L or M), selected spacer (E, if

required), into display mounting hole. Do NOT

thread screw into hole at this time.

• Proper screw length requires base of screw head

to protrude above flat washer a distance equal to

or greater than the screw diameter. If screw

length is inadequate, select longer screw. Select

shortest screw which will protrude the required

distance.

5. Make sure diamond on interface brackets is even with

center of display. (See Figure 3)

6. Use selected screws (A-C or F-H), washers (D) and spacers

(E), if necessary, to connect interface brackets (L and M) to

back of display. (See Figure 3)

Figure 3

(E) x 4, if required

(M)

(L)

(A-C or F-H) x 4

(D) x 4

Match diamond with

center of display

1 2 3 4 5 6 7 8 9 10 11 ... 19 20

Comentários a estes Manuais

Sem comentários

Chief Fusion Manual de Instalação Página 6

Comentários a estes Manuais

Manuais e produtos relacionados com Fixações de teto para ecrã plano Chief Fusion