
Installation Instructions PDC Series
7
Adjustments
Roll Adjustment
1. Loosen two Nylock nuts inside the PDC. (See Figure 5)
2. Using the slotted holes, adjust the roll, or horizontal
movement.
3. Tighten two Nylock nuts.
Figure 5
Pitch Adjustment
4. Loosen two screws on side of PDC. (See Figure 5)
5. Adjust to desired pitch, or vertical movement.
6. Tighten the screws on side of PDC.
x 2
x 2
4
3
2
1
x 2
x 2
5
6
(Display and faceplate
removed for clarity)
Comentários a estes Manuais