Chief PACPC1 Manual do Utilizador descarregar pdf (Página 5)

Installation Instructions PACPC1

INSTALLATION

Attaching to Drywall

1. Attach bracket (D) to drywall using two #6 x 1" drywall

screws (L). (See Figure 1)

NOTE:

Do NOT overtighten drywall screws.

2. Proceed to Installing Conditioner.

Figure 1

Attaching to Wood Stud

1. Drill two 0.08" pilot holes into wood stud. (See Figure 2)

2. Attach bracket (D) to wall using two #6 x 1" drywall

screws (L).

3. Proceed to Installing Conditioner.

Figure 2

Attaching to 1-1/2" NPT Pole

1. Attach bracket (D) to pole mount bracket (C) using two

1/4-20 x 1/4" buttonhead screws (K). (See Figure 3)

NOTE:

The bracket can be installed for either horizontal or

vertical attachment of the conditioner. (See Figure 3)

Figure 3

2. Attach pole clamp (B) around the pole to the pole mount

bracket using two 1/4-20 x 1-1/4" buttonhead security

screws (H), four 1/4" washers (N), and two spacers (M).

(See Figure 4)

Figure 4

(D)

(L) x 2

Wood

Stud

Wall

(D)

(L) x 2

(K) x 2

(C)

(D)

Conditioner to be Attached Horizontally

Conditioner to be Attached Vertically

(B)

(M) x 2

(H) x 2

(N) x 4

1-1/2" NPT Pole

(Horizontal Attachment Shown)

1 2 3 4 5 6 7 8

Comentários a estes Manuais

Sem comentários

Chief PACPC1 Manual do Utilizador Página 5

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware Chief PACPC1