Chief RSA Series Manual do Utilizador descarregar pdf (Página 6)

RSA Projector Mounts Installation Instructions

INSTALLATION

Wood Stud Installation

1. Carefully determine required mounting location.

IMPORTANT ! : This will require knowing the lens

to screen distance. See projector specifications for

details on determining this distance.

WARNING: IMPROPER INSTALLATION CAN

RESULT IN SERIOUS PERSONAL INJURY OR

DAMAGE TO EQUIPMENT! Structural members

MUST be capable of supporting five times the

combined weight of all equipment being mounted.

IMPORTANT ! : The RSA mounts are designed to be

mounted to double 2" x 4" wood stud cross bracing

(1-1/2" on center) between two ceiling joists.

2. Using the RSA as a guide, mark four mounting hole

locations with a pencil or similar tool. Hole locations

must be centered on 2" x 4" cross braces.

3. Drill four 3/32" (2.5mm) dia. pilot holes to a depth of

1-3/4" (45mm) deep.

4. Align four mounting holes in RSA with four pilot

holes.

IMPORTANT ! : Make sure mount is properly

oriented towards target before securing to

structure.

5. Secure RSA to structure using four #10 flat washers

and four #10 x 3" Phillips head wood screws (not

included).

Ø 2.5mm

(Ø 3/32”)

45mm

(1-3/4”)

(A)

x 4

1 2 3 4 5 6 7 8 9 10 11 ... 15 16

Sem comentários

Chief RSA Series Manual do Utilizador Página 6