Chief Short Throw Interactive Series Manual do Utilizador descarregar pdf (Página 20)

WM210-220-230-240S/SI Installation Instructions

2. Install two 1/4-20 x 1/2" button head security screws (T)

through holes in stop bracket and into holes in sliding nuts.

(See Figure 48)

Figure 48

Adapter Plate Bolts

1. Remove projector from short throw projector mount

according to projector interface instructions.

NOTE: For most projectors, it will be necessary to remove

projector prior to installing four security screws to

projector bracket. For ease of installation, it is

recommended to remove projector prior to performing

the following steps.

WARNING: It is important to replace adapter plate bolts

ONE AT A TIME or adapter plate could fall from mount during

installation!

2. Remove one of four bolts from adapter plate. (See Figure 49)

Figure 49

3. Install one 1/4-20 x 3/4" button head security screw (U) into

hole (vacated by removed bolt in previous step) and into

plastic spacer. (See Figure 50)

4. Repeat Steps 2-3 for remaining three bolts one bolt at a

time.

Figure 50

5. Reinstall projector according to interface instructions.

(T) x 2

Stop

bracket

Sliding nuts

locations

Adapter plate

x 4 (one at a time)

Plastic spacer

Adapter plate

(U) x 4 (one at a time)

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26 27 28

Sem comentários

Chief Short Throw Interactive Series Manual do Utilizador Página 20