Chief Short Throw Interactive Series Manual do Utilizador descarregar pdf (Página 27)

Installation Instructions WM210-220-230-240S/SI

Adapter Plate Bolts

1. Remove projector from short throw projector mount

according to projector interface instructions.

NOTE: For most projectors, it will be necessary to remove

projector prior to installing four security screws to

projector bracket. For ease of installation, it is

recommended to remove projector prior to performing

the following steps.

WARNING: It is important to replace adapter plate bolts

ONE AT A TIME or adapter plate could fall from mount during

installation!

2. Remove one of four bolts from adapter plate. (See Figure 74)

Figure 74

3. Install one 1/4-20 x 3/4" button head security screw (U) into

hole (vacated by removed bolt in previous step) and into

plastic spacer. (See Figure 75)

4. Repeat Steps 2-3 for remaining three bolts one bolt at a

time.

Figure 75

Reinstall projector according to interface instructions.

Adapter plate

x 4 (one at a time)

Plastic spacer

Adapter plate

(U) x 4 (one at a time)

1 2 ... 22 23 24 25 26 27 28

Sem comentários

Chief Short Throw Interactive Series Manual do Utilizador Página 27